Respironics DreamWear Nasal CPAP Mask Bundle

The nasal cushion for the DreamWear Nasal should be replaced once every six months.

Assembly & Disassembly Tips

Assembly

• Press the mask elbow into the frame until it is completely enclosed in the frame connection.
• To connect the cushion, line up the arrow on the front with the arrow on the frame and push the two together until they click into place, and then repeat for the opposite side. Ensure the arrow on the cushion matches the arrow on the frame, as the cushion will not function as intended if not properly connected to the frame.
• The headgear should be looped through the slots in the frame and fastened to desired tightness. The headgear should be attached so that both the Philips Respironics and DreamWear logos face outward.

Disassembly

• The cushion can be removed by pulling the ends away from the frame.
• Similarly, the mask elbow can be removed by simply pulling it out of the frame.
• The headgear is removed by releasing the hook and loop fasteners and then removing it from the headgear slots of the frame.
• If the frame wraps are installed, they can be removed by releasing the hook and loop fasteners.

Cleaning Tips

The parts of the mask excluding headgear should be hand washed daily using warm water and mild soap.

1. Wash the nasal cushion with drinking water and a little soap, or use mask wipes for an even better clean.
2. Rinse thoroughly with water until all the suds have been removed.
3. Set aside to air dry out of direct sunlight.

The headgear should be hand washed each week by following the same steps.

Where is the Cushion Size Located?

The DreamWear cushion size is printed in black letters on the front of the cushion, beside the arrow which indicates the frame and cushion connection points. The cushion is available in four sizes: small, medium, medium wide, and large.

Where is the Frame Size Located?

To find the size of your DreamWear Nasal Mask Frame, locate the elbow at the top of the unit. Just above the elbow, grey letters are imprinted on the frame to indicate the size. The letters "SM" represent a size Small, "MED" represents a size Medium, and "LG" represents a size Large.

How To Determine the Correct Frame Size?

The frame size is equivalent to the distance around the head from one side of the nose to the other. Follow these steps to determine the appropriate frame size:

1. Begin by placing the measuring tape marker at the base of the nose on one side.
2. Use the tape to follow along the side of the cheek and upward over the top of the head.
3. Keep pulling the tape measure around the face, down the other cheek, and to the base of the nose on the opposite side.

Use this measurement to most closely match one of the frame sizes listed below:

• Small Frame - 19 Inches
• Medium Frame - 20 Inches
• Large Frame - 22 Inches

Manufacturer's Frame Sizing Guide

Please Note: The DreamWear Nasal CPAP Mask with Headgear - Fit Pack is sold with a Medium frame only. The medium frame will fit most users.