MedLock Magnetic Hose Coupling Kit

• Uses Proven Technology and Provides Clutter-Free Storage
• Easy to Reconnect CPAP Equipment After an Overnight Restroom Break
• Can Be Washed on the Same Schedule as Your Mask for Easy Maintenance

Designed with the same technology used to help motorsport athletes connect their racing helmet ventilation systems, the magnetic coupling used with the Maglock Mack Connector makes application easy and, by giving your mask a dedicated space to stow when not in use, it keeps your nightstand clutter-free.

For those who have to frequently get up in the night to use the restroom or let a pet outside, the Maglock Mack Connector helps you get right back to sleep thanks to its ability to reconnect your equipment even in low-light conditions.

To care for your Maglock Mack Connector, wash it with mild soap and warm water and allow it to dry completely before re-installing. This product should be washed at the same frequency as your hose, which is usually around once per week. 

What’s Included:

• Patented Magnetic Coupling
• Nightstand Dock

Be advised that this product contains strong magnets that can interfere with medical devices like pacemakers and implantable defibrillators; consult with your doctor if you use or have additional medical equipment.

Dimensions: 2.125”x1.125” dock: 1.5”x1.5” L shaped dock: 2” each side by 1.5”

How to Set Up / Install

Installation for Non-Heated Hoses:

1. Cut off the existing end of the hose side connector.
2. Place the MedLock™ on the cut end of the hose.
3. Rotate the MedLock™ clock-wise to until it is tight.
4. Detach the Mask Side from the hose side of the MedLock™.
5. Locate the Mask Side of the MedLock™ to the Mask receiver.
6. Press the MedLock™ firmly onto the mask.
7. Align the two sides of the MedLock™ and insure they are properly aligned.
8. Connect and disconnect the MedLock™ to assure it works properly. Sweet Dreams!

Installation for Heated Hoses

1. Detach the two sides of the MedLock™ and locate the hose side which has threaded insides.
2. Place a small amount of water on the inside of the hose side of the MedLock™.
3. Firmly press-hose side into the top of the heated tube.
4. Press until the hose lip seats over the ribbed end of the hose-side MedLock™.
5. Locate the Mask Side of the MedLock™ to the Mask receiver.
6. Press the MedLock™ firmly onto the mask.
7. Align the two sides of the MedLock™ and insure they are properly aligned.
8. Connect and disconnect the MedLock™ to assure it works properly. Sweet Dreams!

How to Clean the MedLock

MedLock™ is made with premium food-safe materials. Clean the product in the exact same way as you would your mask and hose. It is safe to put MedLock™ in your sleep therapy device cleaner and sanitizer. 

How to Care for the MedLock 

Take care of your MedLock™ just as you care for your mask and hose. However, remember that your MedLock™ will transfer to new hoses and masks.