Added to Cart ()
We Also Recommend

Details

More

If you're struggling to find the perfect size full face mask, the Evora Full Face Mask Fit Pack is the perfect place to start. This mask offers a secure seal with a unique below the nose cushion to eliminate pressure points across the nose. The Fit Pack includes everything you'd get with a typical mask, bit with three cushion sizes so you can find the right fit, including extra small, small-medium, and large.

Active Sleeper Friendly:

The compact F&P Evora Full Face Mask was designed with Dynamic Support Technology to help your sleep apnea therapy succeed. The Dynamic Support Technology combines both stability wings and a floating seal to comfortably keep your mask secure while allowing you to move throughout the night. Fisher & Paykel conducted a survey where 91% of those who tried the Evora Full Face Mask agreed that the mask had a stable and secure seal. The floating seal is composed of soft silicone that gently wraps under your nose to ensure your comfort. In the same survey, F&P discovered that 96% of participants slept in their favorite sleeping position in the Evora Full Face Mask thanks to the floating seal. 

Set It And Forget It Adjustments

Did you find your perfect headgear setting? Don’t fret about having to refit the Evora Full Face Mask each time you go to bed thanks to the removable frame clip. The removable frame clip allows your settings to remain just how you like them, making cleaning and reassembly a breeze. The headgear is also easy to fit—simply place it over your head, hook the two headgear clips onto the frame, and adjust the top, then the bottom straps to ensure a secure seal and comfortable fit.

Breathable VentiCool Headgear

Are you a warm sleeper? The F&P Evora Full Face Mask is designed with breathable headgear and VentiCool Technology to allow for heat and moisture to escape out and away from you and your partner.

Quiet Exhaust Holes for Minimal Noise

Light sleepers rejoice! You and your partner can sleep soundly with the addition of the F&P Evora Full Face Mask to your CPAP setup. It has exhaust holes by your nose and mouth to reduce the noise output. The Evora Full Face Mask has a sound output of 28 decibels, making it quieter than a whisper. 

Fit Pack Includes All Three Cushion Sizes to Find Your Best Fit

If you’re not sure of your correct cushion size, you’re in luck. The F&P Evora Full Face Mask Fit Pack comes included with all three of the cushion sizes available—extra-small, small to medium, and large—to allow you to try different sizes and find your perfect fit.

Ideal For

More

The Evora Full Face Mask is an excellent choice if you…

  • Are unsure of your cushion size
  • Breathe through your mouth and/or nose
  • Struggle with mask slipping when you move around
  • Need a mask with adjustable headgear
  • Sleep on your back or side
  • Are looking for a compact full face mask that doesn't cover your full nose
  • Want a mask with an open field of view for watching tv or reading
  • Want to avoid red marks and pressure points across your forehead
  • Require high pressure CPAP therapy
  • Have a pacemaker or other medical implant

Tips & Resources

More

Product Manual: Evora Full Face User Guide

Product Sizing Guide: Evora Full Face Sizing Guide

Using Your Mask for the First Time

  • Connect mask cushion to frame
  • Loop fabric headgear straps into mask frame
  • Ensure lower headgear clips are detached from the frame
  • Connect machine hose to the short tube
  • Hold the cushion in place just under the nostrils and over your mouth
  • Pull the headgear over your head
  • Reattach the lower headgear clips
  • Adjust the upper and lower head straps until the mask fits comfortably

Medical Implant Safety

This mask does not contain magnetic clips. This means it is safe for people with pacemakers, insulin pumps, and other medical implants.

Choosing the Correct Cushion Size

The Evora Full Face Fit Pack includes three cushion sizes (extra small, small/medium, and large). Please see our mask sizing guide for details on choosing the correct cushion size. We suggest using this mask with each cushion size, so you can choose the best, most comfortable size for you. If you experience mask leaks or slipping, try sizing your cushion up or down a size.

Care & Cleaning

More

Care & Cleaning Notice

The following information includes recommended instructions for the general care and maintenance of our CPAP masks. Please review your mask's product manual for further details, including dishwasher safety notes.

Mask Part Replacement Schedule

  • Cushion: Every 3-6 Months
  • Headgear: Every 6 Months
  • Complete Mask: Every 12 Months

Disassembling Your Mask

  1. Unhook both Headgear Clips from the Frame
  2. Pull the Frame Clip from the Frame, but leave it attached to the Headgear
  3. Pull the Seal from the Frame
  4. Pull the Tube from the Frame
  5. Pull the Swivel from the Tube

Daily Cleaning

  1. Remove headgear from frame
  2. Gently separate cushion from mask frame
  3. Keep frame attached to the elbow and short tube
  4. Wipe clean the cushion, mask frame, and outside of the elbow and short tube or wash with mild soap and warm water
  5. Rinse inside of short tube with warm water
  6. Allow all parts to dry out of direct sunlight and excess heat
  7. Position short tube so that it can drip dry
  8. Do not reassemble until mask parts are fully dry

Weekly Cleaning

  1. Disassemble mask completely
  2. Wash mask frame, cushion, elbow, short tube and headgear in warm water with mild soap
  3. Rinse each component thoroughly
  4. Allow all parts to dry away from direct sunlight or heat
  5. Hang short tube to drip dry fully
  6. Do not reassemble mask until all parts are fully dry

Cleaning Notes

  • Do not soak parts for more than 10 minutes
  • Do not wash any part of your mask in the dishwasher
  • Do not wash headgear in the washing machine

Specs

More
Sound Level

N/A

Dimensions

N/A

Weight (lbs)

N/A

Pressure Range Low

N/A

Pressure Range High

N/A

Cushion Material

Silicone

Cushion Size(s)

N/A

Headgear Size(s)

Standard

Mask Frame Size(s)

Standard

Headgear Materials

N/A

Frame Materials

N/A

Warranty

N/A

Includes Magnets

N/A

Part Number

EVF1XMLA

What's Included

More

Note: This product includes everything needed to assemble your mask and find the perfect fit. However, your CPAP mask and hose must be purchased separately.

Product image for Fisher & Paykel Evora Nasal CPAP Mask Bundle
Evora Nasal Mask
Standard Headgear
Small Full Face Cushion
Medium Full Face Cushion
Large Full Face Cushion

Replacement Parts

More

FAQs

More

Is the Evora full face mask compatible with all CPAP machines?

Yes, the Evora Full Face Mask is compatible with all CPAP machines. It will connect to any standard-sized hose with 22mm rubber ends, but in the case of the ResMed AirMini, you will need the Zephair Universal Mask Adapter.

If I’m a nose breather, could I use the Evora full face mask?

The Evora Full Face mask is an excellent option for nose and mouth breathers alike, thanks to its supportive headgear and adaptive cushion. If you’re reliably able to breathe through your nose and want an even smaller option, the Evora is available as a nasal mask, too!

How often should I clean my mask?

Your mask cushion should be cleaned with soap and water every single morning after use. The mask frame itself should be cleaned weekly. CPAP mask wipes are also a good way to clean if you’re short on time or have limited access to soap and water.

Fast, free shipping on orders over $99

Get the best price with our 100% Price Protection Guarantee

Discounted replacements with Subscribe & Save

Try any CPAP mask for 30 days, risk-free 

Shop Your Recently Viewed