Vitera Mask Kit

Fisher & Paykel

47 Reviews

Fisher & Paykel Vitera Full Face CPAP Mask - Mannequin Not Included

F&P Vitera Full Face Mask highlighting adaptive seal for leak-free nights, breathable fabric for cooling, and magnet-free safety.

Fisher & Paykel Vitera CPAP Mask - Mannequin Not Included

Testimonial highlighting Vitera mask’s leak-free seal with facial hair, comfort without pressure marks, quiet performance, and side-sleep compatibility.

Fisher & Paykel Vitera Full Face Mask - Rear - Mannequin Not Included

Fisher & Paykel Vitera CPAP Mask Cushion

Product image for Fisher & Paykel Vitera Full Face Mask with Headgear - Fit Pack (All Sizes Included) - Thumbnail Image #9

The Fisher & Paykel Vitera Full Face Mask Assembly Kit lets you refresh your mask set–up and sleep in [Read more ...]

SKUMS-FF-FNP-VTRA-TP-MK-SZ-S

Secure seal with adaptive RollFit XT cushion

Wider cushion base fits more faces

Breathable VentiCool headgear

Magnet-free safe for medical implants

Fit-and-save headgear release clips

Supports back and side sleeping

Adjusts with six velcro fit tabs

Fit Pack available with three cushion sizes

Recommended for you by our CPAP Guides

Fisher & Paykel

47 Reviews

Vitera Mask Kit

$114.00

~~$325.00~~ $114.00

65% Off

Sale Out of Stock

Shipping calculated at checkout.

Type

Please select a Type

Complete Mask Assembly Kit (No Headgear)

Mask Size

Please select a Mask Size

Fit Pack Large Medium Small

Product variants

Quantity

Qty 1

Ships same day if ordered before 4 PM CST

Free shipping on orders over $99

30-day mask fit guarantee

FSA/HSA eligible

The Fisher & Paykel Vitera Full Face Mask Assembly Kit lets you refresh your mask set–up and sleep in [Read more ...]

SKUMS-FF-FNP-VTRA-TP-MK-SZ-S

Secure seal with adaptive RollFit XT cushion

Wider cushion base fits more faces

Breathable VentiCool headgear

Magnet-free safe for medical implants

Fit-and-save headgear release clips

Supports back and side sleeping

Adjusts with six velcro fit tabs

Fit Pack available with three cushion sizes

Fisher & Paykel Vitera Full Face Mask

$114.00

~~$325.00~~ $114.00

Sale Out of Stock

Details

Less

The Fisher & Paykel Vitera Full Face Mask Assembly Kit lets you refresh your mask set–up and sleep in almost any position.

Please note that this product is a mask kit, meaning it does not include a head strap.

Rollfit XT Cushion Forms—and Keeps—a Better Seal

Improvements to the RollFit XT Cushion are designed to allow a greater range of motion without impacting the seal or causing leaks. The RollFit XT is ideal for active sleepers since it has a broader base than the original design to accommodate several sleeping positions.

Multiple Cushion Sizes, Designed to Let Active Sleepers Change Sleeping Positions

Many full face CPAP masks cannot accommodate sleeping on your side or stomach because the pressure of the pillow against the mask can cause leaks and interrupt your sleep therapy. But the Vitera cushion, which comes in three sizes, is stable and gives you the freedom to move around so you can continue your sleep therapy uninterrupted.

Forehead Support Helps Anchor Cushion

Integrated forehead support helps provide stability at the cushion, anchoring it in place while providing the extra support needed for even the most active of sleepers. This design helps prevent leaks and works to create a solid seal that can last all night long.

Ideal For

The F&P Vitera Full Face Mask Assembly Kit is an excellent choice if you…

Are looking to refresh your current Vitera mask
Already own compatible headgear for the Vitera mask
Know what size mask cushion you need
Breathe through your mouth and/or nose
Struggle with mask slipping when you move around
Need a mask with highly adjustable headgear
Sleep on your back or side
Make frequent bathroom trips at night
Want an open line of sight to read or watch TV before bed
Require high pressure CPAP therapy

Tips & Resources

Product Review: F&P Vitera Full Face Product Review

Product Manual: F&P Vitera Full Face Mask User Guide

Product Sizing Guide: F&P Vitera Full Face Mask Sizing Guide

Using Your Mask for the First Time

Please keep in mind this assembly kit does not include headgear
Connect mask cushion to frame
Loop fabric headgear straps into mask frame
Ensure headgear clips are detached from the frame
Connect machine hose to the front of the mask frame
Hold the cushion in place over your nose and mouth
Pull the headgear over your head
Attach the lower headgear straps using the fast release clips
Adjust the upper and lower head straps until the mask fits comfortably
Adjust top strap if needed

Medical Implant Safety

This mask does not contain magnetic clips. This means it is safe for people with pacemakers, insulin pumps, and other medical implants.

Finding Your Cushion Size

The size is imprinted on the silicone cushion about ¾ of the way up the bridge of the nose, indicated by S for small, M for medium, and L for large. The mask frame is one-size-fits-all, and headgear is available in small and medium/large, with the medium/large fitting most people.

Care & Cleaning

Care & Cleaning Notice

The following information includes recommended instructions for the general care and maintenance of our CPAP masks. Please review your mask's product manual for further details, including dishwasher safety notes.

Mask Part Replacement Schedule

Cushion: Every 3-6 Months
Frame: Every 3-6 Months
Headgear: Every 6 Months
Complete Mask: Every 12 Months

Disassembling Your Mask

Pull mask elbow away from CPAP hose
Gently pull mask cushion away from frame to separate the cushion
Undo velcro head straps and pull away from hollow frame

Daily Cleaning

Disassemble mask cushion from frame
Wipe cushion clean or wash with mild soap and warm water
Allow to dry out of direct sunlight and excess heat
Do not reassemble until mask parts are fully dry

Weekly Cleaning

Disassemble mask completely
Wash mask frame, cushion, and headgear in warm water with mild soap
Rinse each component (excluding the cushion) thoroughly
Allow all parts to dry away from direct sunlight or heat
Do not reassemble mask until all parts are fully dry

Specs

Sound Level

N/A

Dimensions

N/A

Weight (lbs)

N/A

Pressure Range Low

N/A

Pressure Range High

N/A

Cushion Material

N/A

Cushion Size(s)

Small

Headgear Size(s)

N/A

Mask Frame Size(s)

N/A

Headgear Materials

N/A

Frame Materials

N/A

Warranty

N/A

Includes Magnets

N/A

Part Number

400VIT131

What's Included

This product includes everything needed to refresh your mask, except for headgear. Your headgear must be purchased separately, as well as your CPAP machine and hose.

Vitera Full Face Mask Frame

Small Full Face Cushion

Headgear Clips

Tube Swivel

Elbow

Replacement Parts

Fisher & Paykel

Fisher & Paykel's Vitera Full Face Mask Headgear Clips

$25.00

Add to cart

Fisher & Paykel

Fisher & Paykel Vitera Full Face Mask

$114.00

Select Options

Fisher & Paykel

Fisher & Paykel Vitera Full Face Mask Cushions

$54.00

Select Options

Fisher & Paykel

Fisher & Paykel Vitera Full Face Mask Elbow Replacement

$25.00

Add to cart

Fisher & Paykel

Fisher & Paykel Vitera Full Face Mask Headgear Replacement Part

$35.00

Select Options

FAQs

Are the parts for this mask interchangeable with parts for the simplus?

With the exception of the swivel, which is interchangeable with the Simplus, Eson, and Vitera; the Vitera uses parts that are unique to this specific mask and are not interchangeable with other masks, including the Simplus.

What sleeping positions can this mask support?

The Vitera is exceptionally good for back sleeping, can accommodate side sleeping, and does well with active sleepers, too. Stomach sleepers should opt for a low-profile full face mask like the DreamWear Full Face or AirFit F30i.

Does the Vitera use magnetic clips?

The Vitera does not use magnetic clips for the headgear. It's safe to use for people that have certain implanted medical devices, including pacemakers and defibrillators.

How to stop full face mask leaks?

Full face masks can leak when pressure is applied from a pillow or the bed, depending on your sleeping position. The Vitera was designed with a flexible cushion, designed to give you the maximum amount of movement without breaking the seal of your mask. If you notice a mask leak as soon as you start your machine, you can usually resolve this by tightening the straps. Be careful not to overtighten, as this can put you at risk for injury.

How to breathe with a full face CPAP mask?

Breathing with a full face CPAP mask can be difficult at first, as you will initially need to adjust to the incoming pressure and synchronize your breathing. When the airflow begins, take a deep breath and then exhale. Take another breath in the same way, and then try to breathe normally. It may take a few breaths for the pressure relief features of the machine to kick in, but once that happens you should be able to breathe normally.

What’s the difference between simplus vs Vitera?

The Simplus and Vitera look very similar and share a 360-degree ball-and-socket hose joint. Outisde of that, the newer Vitera features an improved hose connector with VisiBlue highlights for easily identifiable connection points. The nasal bridge connector is also slimmer and the headgear clips are much easier to connect to the mask frame than the Simplus headgear. The Vitera headgear also corrects an issue with the Simplus headgear that allowed it to be accidentally removed when trying to adjust the fit. Finally, the RollFit cushion of the Vitera is also much softer and more effective than the Simplus cushion and is significantly more effective at containing leaks.