The AirTouch N30i is a great choice if you: 

• Breathe through your nose only
• Can keep your mouth closed while you sleep
• Are an active sleeper who changes positions frequently
• Sleep on your back, side, or stomach
• Experience claustrophobia from traditional over-the-nose designs
• Prefer a minimal-contact design to reduce red marks
• Have sensitive skin that is prone to pressure points
• Like the flexibility of a silicone mask but need the gentle touch of fabric
• Sweat a lot while wearing silicone cushions and/or frames
• Need to get in and out of your mask quickly for nighttime bathroom breaks
• Wear your mask while reading or watching TV before bed

Product Manual: AirTouch N30i User Manual

Sizing Guide: AirTouch N30i Sizing Guide

Using your mask for the first time

• Connect the air tubing from your CPAP to the mask elbow
• Place the cushion under your nose and pull the frame over your head
• Adjust velcro head strap until the mask fits comfortably
• Reattach the elbow to complete assembly

Choosing your frame size 

The N30i is available in two frame sizes, small or standard. Most people are encouraged to go with the standard-sized frame. Customers with small or petite faces are encouraged to go with the small frame size. We invite you to contact our CPAP Guide team if your frame does not fit. 

Don’t know your mask size?

If this is your first time using this mask we suggest starting with the AirTouch N30i Starter Pack. This order includes two cushion sizes including small wide and medium. A size large cushion can also be purchased separately. We suggest testing each cushion size included in your fit pack to ensure you choose the right one. If you mask is creating red marks or leaking air, adjust your head straps first. Then if the problem continues, try a different cushion size. 

Is a Mask Kit right for you? 

This mask is fully compatible with the AirFit N30i and the P30i. If you currently own a compatible head strap and know your cushion and headgear size, you can purchase one of our Mask Assembly Kits which include the hollow frame tubing in small or large, a quick release elbow, and nasal cradle cushion in either small-wide, medium, or large.

Cleaning Instructions for the AirTouch N30i Mask

Proper cleaning and care will help maintain the performance and longevity of your AirTouch N30i Nasal Cradle Mask. Follow the instructions below to ensure your mask remains clean and effective.

Mask Part Replacement Schedule

• AirTouch Cushion: Every Month
• AirTouch Frame System: Every 3-6 Months
• Headgear: Every 6-9 Months

Disassembling Your Mask

Before cleaning, fully disassemble your mask:

1. Remove the Cushion: Firmly pull the cushion out from both ends of the frame.
2. Detach the QuietAir Vent: Gently peel the cushion away and slide the vent out.
3. Remove the Headgear: Undo the fastening tabs and pull the headgear away from the frame. After detaching, close the fastening tabs to prevent damage to the fabric sleeves.
4. Detach the Elbow: Squeeze the side buttons on the elbow and remove it from the frame.

Once disassembled, you are ready to clean your mask.

Daily Cleaning

The following components should be cleaned daily:

• Cushion
• QuietAir Vent

Cleaning Process

1. Soak the components in warm water with a mild liquid detergent. Ensure there are no air bubbles while soaking.
2. Hand wash the QuietAir vent with a soft bristle brush, paying special attention to the vent holes.
3. Hand wash the cushion without a bristle brush.
4. Rinse all components thoroughly under running water.

Drying:

• Squeeze the fabric cushion with a clean towel to remove excess water.
• Shake the QuietAir vent to remove excess water.
• Leave all components to air dry out of direct sunlight.

Weekly Cleaning

The following components should be cleaned weekly:

• Frame
• Headgear
• Elbow

Cleaning Process

1. Soak the components in warm water with a mild liquid detergent. Ensure there are no air bubbles while soaking.
2. Hand wash all components using a soft bristle brush.
3. Rinse all components thoroughly under running water.

Drying:

• Squeeze excess water from the headgear and fabric frame using a clean towel.
• Leave all components to air dry out of direct sunlight.

Reassembling Your Mask

Follow these steps to put your mask back together:

1. Reattach the Elbow: If the elbow ring was detached, reinsert it into the top of the frame. Connect the elbow into the frame until you hear a click.
2. Attach the Headgear: With the ResMed logo facing up, insert both straps of the headgear into the frame from the inside and fold the fastening tabs over to secure them.
3. Reinsert the QuietAir Vent: Align the tab on the cushion with the notch on the vent, then gently pull the cushion over the vent.
4. Reconnect the Cushion: Attach the ends of the frame to the cushion, ensuring the arrows on the cushion and frame are aligned.

Your AirTouch N30i mask is now fully reassembled and ready for use.

For more details, refer to ResMed’s AirTouch N30i Cleaning Instruction Video, your user guide, or download the MyAir app for additional support.