Overview

19mm CPAP Hose 10ft

Roscoe Medical

Product image for 10 Foot Long 19mm Diameter CPAP Hose with 22mm Rubber Ends - Thumbnail Image #3

Product image for 8 Foot Long 19mm Diameter CPAP Hose with 22mm Rubber Ends

Product image for 8 Foot Long 19mm Diameter CPAP Hose with 22mm Rubber Ends - Thumbnail Image #4

Product image for 10 Foot Long 19mm Diameter CPAP Hose with 22mm Rubber Ends - Thumbnail Image #2

Most CPAP and BiLevel machines are packaged with a standard six-foot hose, but the 10 Foot Long 19mm Diameter CPAP Hose with 22mm Rubber Ends is an especially helpful tool for active sleepers since it increases range of motion. Learn More About the 10 Foot Long 19mm Diameter CPAP Hose with 22mm Rubber Ends: Extra Four Feet of Tubing Gives You More Freedom Smooth Bore Interior and Molded Exterior Work Together for Superior Performance Designed for Use With 19mm Tubing Extra Four Feet of Tubing Gives You More Freedom Those who tend to sleep toward the middle of the bed or who have a longer distance from the bed to the CPAP machine can benefit from the added length—an additional 48 inches, to be exact. Smooth Bore Interior and Molded Exterior Work Together for Superior Performance The latex-free, non–heated hose features a smooth bore design and a 22mm diameter rubber cuff, which helps provide consistent pressure delivery and allows the hose to attach to any CPAP machine compatible with a standard hose. The molded plastic frame exterior provides added support. Designed for Use With 19mm Tubing The diameter of the hose directly impacts how the prescribed pressure is delivered, so your machine must be able to accommodate the diameter of the hose. This hose is not compatible with machines with 15mm hoses labeled thin or slim. General Tips Section Hose Tips The original or 'standard' diameter for a CPAP therapy hose is 22mm and can be used with the majority of CPAP, Auto Adjusting and BiLevel or BiPAP machines. Some machines require a 15mm tubing referenced as "Thin" or "SlimLine™" and are designed to work ONLY with a 15mm hose. Other machines allow for the selection of either a 22mm or a 15mm hose. Still other machines use ONLY a heated hose specific to that line of devices and cannot use a non-heated hose of any diameter. PL-EZ-FLX10,SBT-CPAP8

SKUHS-SD-RMC-RSCTUB-SZ-10

Roscoe Medical

19mm CPAP Hose 10ft

$9.75

~~$9.89~~ $9.75

1% Off

Sale Out of Stock

Shipping calculated at checkout.

Size

Please select a Size

10 Foot 8 Foot

Product variants

Quantity

Qty 1

Ships same day if ordered before 4 PM CST

Free shipping on orders over $99

100% price match guarantee

FSA/HSA eligible

SKUHS-SD-RMC-RSCTUB-SZ-10

This product is coming soon. Mar. 13

19mm Diameter CPAP Hose with 22mm Rubber Ends

$9.75

~~$9.89~~ $9.75

Sale Out of Stock

Details

Most CPAP and BiLevel machines are packaged with a standard six-foot hose, but the 10 Foot Long 19mm Diameter CPAP Hose with 22mm Rubber Ends is an especially helpful tool for active sleepers since it increases range of motion.

Learn More About the 10 Foot Long 19mm Diameter CPAP Hose with 22mm Rubber Ends:

Extra Four Feet of Tubing Gives You More Freedom
Smooth Bore Interior and Molded Exterior Work Together for Superior Performance
Designed for Use With 19mm Tubing

Extra Four Feet of Tubing Gives You More Freedom

Those who tend to sleep toward the middle of the bed or who have a longer distance from the bed to the CPAP machine can benefit from the added length—an additional 48 inches, to be exact.

Smooth Bore Interior and Molded Exterior Work Together for Superior Performance

The latex-free, non–heated hose features a smooth bore design and a 22mm diameter rubber cuff, which helps provide consistent pressure delivery and allows the hose to attach to any CPAP machine compatible with a standard hose. The molded plastic frame exterior provides added support.

Designed for Use With 19mm Tubing

The diameter of the hose directly impacts how the prescribed pressure is delivered, so your machine must be able to accommodate the diameter of the hose. This hose is not compatible with machines with 15mm hoses labeled thin or slim.

General Tips Section

Hose Tips

The original or 'standard' diameter for a CPAP therapy hose is 22mm and can be used with the majority of CPAP, Auto Adjusting and BiLevel or BiPAP machines. Some machines require a 15mm tubing referenced as "Thin" or "SlimLine™" and are designed to work ONLY with a 15mm hose. Other machines allow for the selection of either a 22mm or a 15mm hose. Still other machines use ONLY a heated hose specific to that line of devices and cannot use a non-heated hose of any diameter.

PL-EZ-FLX10,SBT-CPAP8

Specs

Weight (lbs)

N/A

Dimensions

N/A

Materials

This product DOES NOT contain latex rubber.

Warranty

Mfg 1 Month

Part Number

PL-EZ-FLX10

FAQs

Are all CPAP hoses the same?

In years gone by, the answer to this question would have been "yes", but today not all hoses are the same and some machines use different hose types. All CPAP hoses / tubings serve the same function: directing the air stream from the machine to the mask. Historically, a standard CPAP hose is six feet long, has an internal diameter of 19mm and a connector cuff with an internal diameter of 22mm. Today some hoses are 6 feet long, others are 4 foot long, 8 foot long and 10 foot long. Some hoses have an internal diameter of 19mm (standard) and others have an internal diameter of 15mm (thin or slim style). To use a slim 15mm hose, the machine must have a menu option setting to accept the narrower diameter of a 15mm hose and still deliver the prescribed pressure to the mask to ensure effective therapy. All hoses have a 22mm connection cuff and fit on all CPAP masks. The connection ports on all CPAP, APAP and BiLevel machines, humidifiers, and masks are a standard size, so a standard CPAP hose will fit on all. Some of the very small machines use a hose adapter between the machine and the 22mm cuff of the hose. Some manufacturers offer a heated hose option designed to work only with their machines. To read more about heated hoses see the "What is a heated CPAP hose?" article included in this FAQ section. A few auto-titrating CPAPs and BiLevels require a pressure line sensor to detect breathing patterns and pressure needs. The sensor may be in the form of an adapter with narrow tubing attached or the narrow tubing is threaded inside the six foot hose. In both cases, one end of the narrow tubing is plugged into the machine. Those machines will not operate without the pressure line sensor.

What is rainout?

Rainout is the accumulation of water in a CPAP tube due to warm moist air cooling on its way from your CPAP machine to your CPAP mask. Solutions to rainout include raising the temperature of your bedroom, insulating your tubing with a Snugglehose, or purchasing a CPAP machine with an integrated heated hose.

How do I clean a CPAP hose?

Your CPAP hose will last longer if it is detached every morning and hung to air dry.

Drying the hose each morning will also prevent bacteria from growing in the damp interior and help reduce the possibility of colds and other health issues. Remember, what is in the hose goes into the airway.

If you are not drying the hose daily, then be sure to replace the hose very frequently as negative health issues will result!

Hose care tips:

Remove the hose by gripping the end or cuff, not the hose itself
Hang the hose to dry after each use
Wash hose weekly to avoid residue and maintain health
Protect the hose from curious pets

Hose care tools:

A Hose Quick Connect helps the tube to easily disconnect from the humidifier
Purdoux Mask and Hose Soap is specially formulated mild soap designed to clean a CPAP hose and mask.
The Tube Cleaning System is a tube care kit to rinse, soak and dry the hose.
The CPAP Tube Brush Second Gen is used to scrub the inside of a tube. It is available for both slim line and standard diameter hoses.
The Republic of Sleep Hose Coverwraps the length of the tube in soft fleece material. Although its intention is to help reduce rainout (water collecting in the tube) many CPAP users report it deters pets from using the hose as a chew toy.
+ See More

How often should I replace my CPAP hose?

CPAP hoses

can last a long time, sometimes up to a year if taken care of properly. Signs of wear include dry, cracked places on the inside lining or on the rubber ends; "stretch marks" near the rubber ends; mineral deposits or mold from water left inside the hose; or a visible puncture or tear in the material.

How do I avoid getting tangled in CPAP hoses?

There are a few ways to keep from getting tangled up in your CPAP tubing. Try running your CPAP hose behind the headboard of your bed. Also, there are several types of suspension systems we carry here at CPAP.com. You can see the different types of Hose Management Systems under our Comfort & Cleaning section. One example is the HoseBuddy Tangle Free CPAP Hose Suspension System:

Here are some items we recommend that may help with hose comfort: CPAP Hose Lift HoseBuddy Tube Management Clip + See More

What is a heated CPAP hose?

A heated CPAP hose contains copper coils embedded in, or wrapped around, the hose. These coils are gently heated to conduct a constant temperature throughout the length of the hose. This enhances the comfort of the therapy and reduces or eliminates rainout caused by the water condensing as it travels through the hose to the mask.

Heated hoses are more expensive alternatives to cloth tubing insulation, but they prevent rainout in nearly all cases. The Hybernite Rainout Control System is a stand alone option that can be used with any machine to prevent rainout and increase delivered humidification.

Some manufacturers have developed heated hoses to work specifically with select machines in their product lines. The ClimateLineAir™ Heated Tube for AirSense™ 10 and AirCurve™ 10 Machines is an example of a heated hose used by the AirSense™ 10 and AirCurve™ 10 Machines.

Here are some heated hoses we carry:

ComfortLine Heated Tubing Kit

ClimateLine™ Tubing for S9™ and H5i™ Climate Control System

PR System One Heated Tube for 60 Series Machines

+ See More

What is a hose cover?

A hose cover is placed over the hose in order to insulate the hose and to make the hose more comfortable. The simplest and most cost effective way to insulate a CPAP hose is to wrap it in an insulating fabric. This enables the hose to remain flexible and adds little weight. Companies such as Snugglehose provide a cost effective tubing insulation available in several colors and styles. Not only will the covers reduce or eliminate rainout, they also provide a more personal and less institutionalized appearance. An example of a Snugglehose is shown below. Here are some hose covers we carry: Tubing Wrap for AirSense™ 10, AirCurve™ 10, and S9 Series SlimLine™ Tubing Respironics Insulated Hose Cover ResMed Zippered Tubing Wrap + See More