The ResMed Bed Mount System for AirMini Travel CPAP Machine allows you to secure your ResMed AirMini CPAP device to various surfaces, including your bedside table, bedframe, wall, or even your airline seat pocket. ResMed Bed Mount System for AirMini CPAP Machine Features and Benefits: Keep Your AirMini Machine Stabilized on an RV, Bus, Plane, or Train Ideal for Active Sleepers Keep Your Machine Stabilized on an RV, Bus, Plane, or Train If you have trouble keeping your AirMini in one spot, the ResMed Airmini mount system lets you secure your AirMini device almost anywhere for carefree sleep therapy wherever you go! To find similar products, visit all compatible products on the AirMini Accessories & Supplies page. General Tips Section Using the ResMed Mount System: Mattress Module: The mount system's mattress module can be used to attach the AirMini to the side of a bed, between a bed frame and mattress. Slide the Airmini into the bed caddy mounting system Hold the mount at an angle and push it onto the mattress module. Adjust the angle to fit the mount in place. Turn the mount clockwise until it locks into place. Lay the strap flat underneath the mattress. Hook Module: The hook module can be used to hang the AirMini onto various locations such as a bed rail, bedside table, or airplane seat pocket. Slide the AirMini into the mount. Hold the mount at an angle and push it onto the hook module. Adjust the angle to fit the mount in place. Turn the mount clockwise until it locks into place Hang the hook onto a bed rail, bedside table, or airplane seat pocket. Wall Module: The wall module can be used to mount the AirMini to a wall. Attach the wall module to the wall with screws and/or adhesive double-sided tape (not included). Slide the AirMini into the mount. Hold the mount at an angle and push it onto the wall module. Adjust the angle to fit the mount in place. Turn the mount clockwise until it locks into place 38842