ResMed AirSense 10 DC Converter
ResMed AirSense 10 DC Converter
Ships same day if ordered before 4 PM CST
Free shipping on orders over $99
100% price match guarantee
FSA/HSA eligible
DC Converter 24V 90W For AirStart 10, AirSense 10, and AirCurve 10 Machines
Details
MoreThe ResMed AirSense 10 DC Converter connects Air10 CPAP machines to 12V or 24V battery power sources like those found in a car, recreational vehicle, or boat.
This product can be used to power the AirSense10 and AirCurve 10 machine (with Built-In HumidAir Humidifier) as well as the ClimateLineAir Heated Tubing and includes alligator clips with a DC adapter for connection to a suitable battery if a DC power source is not immediately available.
Find all compatible parts listed here on the AirSense 10 Parts page.
ResMed AirSense 10 DC Converter Features and Benefits:
- Works with a Vehicle Cigarette Lighter Socket
- CPAP Power Adapter for Camping or Road Trips
- Alligator Clips to Power CPAP Therapy Device with an External Battery
- DC Power Converter for ResMed CPAP Machines
The ResMed AirSense 10 DC Converter 24V 90 works with any ResMed sleep therapy device from the following selection:
- AirStart 10 CPAP with HumidAir Heated Humidifier
- AirStart 10 Auto CPAP with HumidAir Heated Humidifier
- AirSense 10 CPAP Machine with HumidAir Heated Humidifier
- AirSense 10 Elite CPAP Machine with HumidAir Heated Humidifier
- AirSense 10 AutoSet CPAP Machine with HumidAir Heated Humidifier
- AirSense 10 AutoSet for Her CPAP Machine with HumidAir Heated Humidifier
- AirCurve 10 S BiLevel Machine with HumidAir Heated Humidifier
- AirCurve 10 VAuto BiLevel Machine with HumidAir Heated Humidifier
General Tips Section
On/Off Switch:
Please be aware there is an on/off switch on the back of the adapter head. When plugged in, the dash "-" side of the adapter must be pressed down in order for the machine to receive power. If it is not, the machine will not turn on.
Vehicle Safety Tips
These vehicle safety tips are written according to statements from the manufacturer.
- When the device is not in use, the DC Converter should not be plugged into the vehicle.
- If the converter cuts power to the device when the car starts, disconnect the converter from the vehicle. Then, reconnect the converter after a few seconds pass.
- Using the machine and humidifier together may drain the battery more quickly.
- The 12-volt is intended to be used with common systems that are "positive hot" and "negative ground" only. If these details are unknown, speak with the manufacturer of the vehicle.
37297